| Server IP : 104.21.38.3 / Your IP : 162.158.170.106 Web Server : Apache System : Linux krdc-ubuntu-s-2vcpu-4gb-amd-blr1-01.localdomain 5.15.0-142-generic #152-Ubuntu SMP Mon May 19 10:54:31 UTC 2025 x86_64 User : www ( 1000) PHP Version : 7.4.33 Disable Function : passthru,exec,system,putenv,chroot,chgrp,chown,shell_exec,popen,proc_open,pcntl_exec,ini_alter,ini_restore,dl,openlog,syslog,readlink,symlink,popepassthru,pcntl_alarm,pcntl_fork,pcntl_waitpid,pcntl_wait,pcntl_wifexited,pcntl_wifstopped,pcntl_wifsignaled,pcntl_wifcontinued,pcntl_wexitstatus,pcntl_wtermsig,pcntl_wstopsig,pcntl_signal,pcntl_signal_dispatch,pcntl_get_last_error,pcntl_strerror,pcntl_sigprocmask,pcntl_sigwaitinfo,pcntl_sigtimedwait,pcntl_exec,pcntl_getpriority,pcntl_setpriority,imap_open,apache_setenv MySQL : OFF | cURL : ON | WGET : ON | Perl : ON | Python : OFF | Sudo : ON | Pkexec : ON Directory : /usr/src/linux-headers-5.15.0-143/arch/arm/include/debug/ |
Upload File : |
/* SPDX-License-Identifier: GPL-2.0-only */ /* * Debugging macro include header * * Copyright (C) 2011 Xilinx */ #define UART_CR_OFFSET 0x00 /* Control Register [8:0] */ #define UART_SR_OFFSET 0x2C /* Channel Status [11:0] */ #define UART_FIFO_OFFSET 0x30 /* FIFO [15:0] or [7:0] */ #define UART_SR_TXFULL 0x00000010 /* TX FIFO full */ #define UART_SR_TXEMPTY 0x00000008 /* TX FIFO empty */ #define UART0_PHYS 0xE0000000 #define UART0_VIRT 0xF0800000 #define UART1_PHYS 0xE0001000 #define UART1_VIRT 0xF0801000 #if IS_ENABLED(CONFIG_DEBUG_ZYNQ_UART1) # define LL_UART_PADDR UART1_PHYS # define LL_UART_VADDR UART1_VIRT #else # define LL_UART_PADDR UART0_PHYS # define LL_UART_VADDR UART0_VIRT #endif .macro addruart, rp, rv, tmp ldr \rp, =LL_UART_PADDR @ physical ldr \rv, =LL_UART_VADDR @ virtual .endm .macro senduart,rd,rx strb \rd, [\rx, #UART_FIFO_OFFSET] @ TXDATA .endm .macro waituartcts,rd,rx .endm .macro waituarttxrdy,rd,rx 1001: ldr \rd, [\rx, #UART_SR_OFFSET] ARM_BE8( rev \rd, \rd ) tst \rd, #UART_SR_TXEMPTY beq 1001b .endm .macro busyuart,rd,rx 1002: ldr \rd, [\rx, #UART_SR_OFFSET] @ get status register ARM_BE8( rev \rd, \rd ) tst \rd, #UART_SR_TXFULL @ bne 1002b @ wait if FIFO is full .endm