# Bug#13721257 RACE CONDITION IN UPDATES OR INSERTS OF WIDE RECORDS
# Test what happens when a record is inserted or updated so that some
# columns are stored off-page.

--source include/have_innodb.inc
# The 7000 in this test is a bit less than half the innodb_page_size.
--source include/have_innodb_16k.inc

# DEBUG_SYNC must be compiled in.
--source include/have_debug_sync.inc

# Valgrind would complain about memory leaks when we crash on purpose.
--source include/not_valgrind.inc
# Embedded server does not support crashing
--source include/not_embedded.inc
# Avoid CrashReporter popup on Mac
--source include/not_crashrep.inc

call mtr.add_suppression("InnoDB: The log sequence numbers [0-9]+ and [0-9]+ in ibdata files do not match the log sequence number [0-9]+ in the ib_logfiles!");

CREATE TABLE t1 (a INT PRIMARY KEY, b TEXT) ENGINE=InnoDB;
CREATE TABLE t2 (a INT PRIMARY KEY) ENGINE=InnoDB;
CREATE TABLE t3 (a INT PRIMARY KEY, b TEXT, c TEXT) ENGINE=InnoDB;

INSERT INTO t1 VALUES (1,REPEAT('a',30000)),(2,REPEAT('b',40000));
SET DEBUG_SYNC='before_row_upd_extern SIGNAL have_latch WAIT_FOR go1';
BEGIN;
# This will not block, because it will not store new BLOBs.
UPDATE t1 SET a=a+2;
ROLLBACK;
BEGIN;
--send
UPDATE t1 SET b=CONCAT(b,'foo');

connect (con1,localhost,root,,);
SET DEBUG_SYNC='now WAIT_FOR have_latch';

# this one should block due to the clustered index tree and leaf page latches
--send
SELECT a, RIGHT(b,20) FROM t1;

connect (con2,localhost,root,,);

# Check that the above SELECT is blocked
let $wait_condition=
  select count(*) = 1 from information_schema.processlist
  where state in ('Sending data', 'Opening tables') and
        info = 'SELECT a, RIGHT(b,20) FROM t1';
--source include/wait_condition.inc

SET DEBUG_SYNC='now SIGNAL go1';

connection con1;
reap;
connection default;
reap;
SET DEBUG='+d,row_ins_extern_checkpoint';
SET DEBUG_SYNC='before_row_ins_extern_latch SIGNAL rec_not_blob WAIT_FOR crash';
ROLLBACK;
BEGIN;
--send
INSERT INTO t1 VALUES (3,REPEAT('c',50000));

connection con1;
SET DEBUG_SYNC='now WAIT_FOR rec_not_blob';
SET SESSION TRANSACTION ISOLATION LEVEL READ UNCOMMITTED;
SELECT @@tx_isolation;

# this one should see (3,NULL_BLOB)
SELECT a, RIGHT(b,20) FROM t1;
SELECT a FROM t1;

# Request a crash, and restart the server.
SET DEBUG='+d,crash_commit_before';
# Write file to make mysql-test-run.pl restart the server
--exec echo "restart" > $MYSQLTEST_VARDIR/tmp/mysqld.1.expect
--error 2013
INSERT INTO t2 VALUES (42);

disconnect con1;
disconnect con2;
connection default;
# This connection should notice the crash as well.
--error 2013
reap;

--enable_reconnect
--source include/wait_until_connected_again.inc
--disable_reconnect

CHECK TABLE t1;

INSERT INTO t3 VALUES
       (1,REPEAT('d',7000),REPEAT('e',100)),
       (2,REPEAT('g',7000),REPEAT('h',100));
SET DEBUG_SYNC='blob_write_middle SIGNAL go_sel WAIT_FOR go_upd';
# This should move column b off-page.
--send
UPDATE t3 SET c=REPEAT('f',3000) WHERE a=1;

--echo # Connection con1:
connect (con1,localhost,root,,);
SET DEBUG_SYNC='now WAIT_FOR go_sel';
SET SESSION TRANSACTION ISOLATION LEVEL READ UNCOMMITTED;
SELECT @@tx_isolation;
SELECT a, RIGHT(b,20), RIGHT(c,20) FROM t3;
set debug_sync='now SIGNAL go_upd';

--echo # Connection default:
connection default;
--echo # reap UPDATE t3 SET c=REPEAT('f',3000) WHERE a=1;
reap;

--echo # Connection con1:
connection con1;
SELECT a, RIGHT(b,20), RIGHT(c,20) FROM t3;

disconnect con1;

connection default;
CHECK TABLE t1,t2,t3;

connect (con2,localhost,root,,);
BEGIN;
INSERT INTO t2 VALUES (347);
connection default;

# The row_upd_extern_checkpoint was removed in Bug#13721257,
# because the mini-transaction of the B-tree modification would
# remain open while we are writing the off-page columns and are
# stuck in the DEBUG_SYNC. A checkpoint involves a flush, which
# would wait for the buffer-fix to cease.
SET DEBUG='+d,row_upd_extern_checkpoint';
SET DEBUG_SYNC='before_row_upd_extern SIGNAL have_latch WAIT_FOR crash';
# This should move column b off-page.
--send
UPDATE t3 SET c=REPEAT('i',3000) WHERE a=2;

connection con2;
SET DEBUG_SYNC='now WAIT_FOR have_latch';

# Check that the above UPDATE is blocked
SELECT info FROM information_schema.processlist
WHERE state = 'debug sync point: before_row_upd_extern';

# Request a crash, and restart the server.
SET DEBUG='+d,crash_commit_before';
# Write file to make mysql-test-run.pl restart the server
--exec echo "restart" > $MYSQLTEST_VARDIR/tmp/mysqld.1.expect
--error 2013
COMMIT;

disconnect con2;
connection default;
# This connection should notice the crash as well.
--error 2013
reap;

--enable_reconnect
--source include/wait_until_connected_again.inc
--disable_reconnect

CHECK TABLE t1,t2,t3;
SELECT a, RIGHT(b,20), RIGHT(c,20) FROM t3;
SELECT a FROM t3;

connect (con2,localhost,root,,);
BEGIN;
INSERT INTO t2 VALUES (33101);
connection default;

# The row_upd_extern_checkpoint was removed in Bug#13721257,
# because the mini-transaction of the B-tree modification would
# remain open while we are writing the off-page columns and are
# stuck in the DEBUG_SYNC. A checkpoint involves a flush, which
# would wait for the buffer-fix to cease.
SET DEBUG='+d,row_upd_extern_checkpoint';
SET DEBUG_SYNC='after_row_upd_extern SIGNAL have_latch WAIT_FOR crash';
# This should move column b off-page.
--send
UPDATE t3 SET c=REPEAT('j',3000) WHERE a=2;

connection con2;
SET DEBUG_SYNC='now WAIT_FOR have_latch';

# Check that the above UPDATE is blocked
SELECT info FROM information_schema.processlist
WHERE state = 'debug sync point: after_row_upd_extern';

# Request a crash, and restart the server.
SET DEBUG='+d,crash_commit_before';
# Write file to make mysql-test-run.pl restart the server
--exec echo "restart" > $MYSQLTEST_VARDIR/tmp/mysqld.1.expect
--error 2013
COMMIT;

disconnect con2;
connection default;
# This connection should notice the crash as well.
--error 2013
reap;

--enable_reconnect
--source include/wait_until_connected_again.inc
--disable_reconnect

CHECK TABLE t1,t2,t3;
SELECT a, RIGHT(b,20), RIGHT(c,20) FROM t3;
SELECT a FROM t3;

SELECT * FROM t2;

DROP TABLE t1,t2,t3;

--echo #
--echo # Bug #29866408	SERVER CRASHES WHEN ADDING LONGTEXT COLUMN
--echo #

CREATE TABLE t1 (
  id int(11) COLLATE utf8mb4_unicode_ci NOT NULL,
  data longtext COLLATE utf8mb4_unicode_ci NOT NULL,
  PRIMARY KEY (id),
  UNIQUE KEY unq_id (id)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_unicode_ci;

INSERT INTO t1 VALUES (1,'');
SET @old_mode=@@sql_mode;
SET GLOBAL SQL_MODE="";

let $num = 3;
while($num)
{
connect (con1,localhost,root,,);
connection con1;
eval ALTER TABLE t1 ADD COLUMN d$num DATETIME NOT NULL;
disconnect con1;
dec $num;
}
connection default;
SET GLOBAL SQL_MODE=@old_mode;
DROP TABLE t1;